 |
|
The Piranha
P120 is the largest single operator ironworker
that Piranha has manufactured. Piranha's 50, 70
and 90 ton models have long dominated the market,
but the industry has demanded an extension of that
line with increased capacities. The P120 has 120
tons of punching capacity and can punch a 1 1/2" hole
in 1" material or a 5" hole in 1/4" material.
If your fabrication requirements include additional
capacities than the P90 offers, the P120 is the
ideal machine for you.
STANDARD FEATURES:
- Complete Punching
Attachment with split
dove tail mounting
- 10 Punch and Die
sets
- 12" Bending Attachment
with split dove tail
mounting
- Automatic Urethane
Hold Down on the Punch
Stripper and on Angle,
Plate and Bar Shear
- Front and rear 5
position joy stick
controls (electric)
with jog up & down,
fast up & down, neutral
- Remote Electric
Foot Switch that can
be connected at either
end of the machine
- Electric Limit Switches
that can be set for
stroke control when
using foot control
- Set of Round Bar
Knives [2 way] (customers
choice to 2)
- Set of 16.625 Plate
Shear Knives [4 way]
- Set of 20.5" Plate
Shear Knives [4 way]
(instead of Round
Bar Knives and 16.625" Plate
Shear Knives)
- Extra Blank Knife
to extend shear to
20.5"
- Set of Angle Knives
[8 way top] [4 way
bottom]
- Set of Coper Knives
[2 way top] [4 way
bottom]
- Chip Buckets (2
each)
- Extra Oil Filter
- Coupling Wrench & 3/8" Allen
Wrench
- Integral Lifting
Lug for instant portability
|
|
| CAPACITIES & SPECIFICATIONS:
MODEL P-120 120 TON |
| Throat Depth |
12" |
Open Height |
15-1/2" |
| Closed Height w/o Die
Block |
10-1/4" |
Work Stations From Floor |
44" |
Hydraulics:
Pump GPM
System R/V PSI |
15
3500 |
Stroke Length |
5-1/4" |
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.) |
1/2" to 2"
1/2 " to 1-3/8" |
Motor STD. 230/460 1800
rpm
Opt. Phase and Voltage
On Request |
20 HP 3 Phase |
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W) |
120 Tons
1-1/2" thru 1"
*5" thru 1/4"
14-1/2" x 21" |
Coper-Notcher (Tons)
(Mat.) |
95
4" x 6" x 3/8" |
Dimensions
(NET) W-L-H |
35 " x 90" x 68-1/2" |
Plate Shear |
20-1/2" Long
1" x 12"
3/4" x 18"
1/2" x 20" |
| Bending Attachment 12" |
Optional Lengths Available |
Weight (NET) lbs |
6200 |
| Strokes Per Minute |
40 @ 3/4" |
Angle Shear (Max.) |
6" x 6" x 5/8" |
To request information on this machine, contact us at info@piranhafab.com.
| |
 |
|
Ironworkers
Single P40
Single P50
Single P70
Single P90
Single P120
Dual PII-35
Dual PII-65
Dual PII-88
Dual PII-110
Dual PII-140
Options
Tooling
Ironworker Specs (pdf)
|
|
