IRONWORKERS The Piranha Model P-50 features Automatic Urethane Hold Downs on the Punch Stripper and Bar, Plate and Angle Shear. This assures precise cuts and longer punch and blade life. STANDARD FEATURES: Complete Punching Attachment with split dove tail mounting 14 Punch and Die sets 8" bending Attachment with split dove tail mounting Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral Remote Electric Foot Switch that can be connected at either end of the machine Electric Limit Switches that can be set for stroke control when using foot control Set of Round Bar Knives [2 way] (customers choice to 1-1/2") Set of 12.125 Plate Shear Knives [4 way] Set of Angle Knives [8 way top] [4 way bottom] Set of Coper Knives [2 way top] [4 way bottom] Chip Buckets (2 each) Extra Oil Filter Coupling Wrench & 3/8" Allen Wrench Integral Lifting Lug for instant portability CAPACITIES & SPECIFICATIONS: MODEL P-50 50 TON Throat Depth 8" Open Height 13-1/2" Closed Height w/o Die Block 9-1/4" Work Stations From Floor 42" Hydraulics: Pump GPM System R/V PSI 10.5 2600 Stroke Length 4-1/4" Bar Shear: Round(Min. to Max.) Square (Min. to Max.) 1/4" to 1-1/2" 1/2 " to 1" Motor STD. 230/460 1800 rpm Opt. Phase and Voltage On Request 10 HP 3 Phase Punch: Max. Material Max. Hole *Special Tool Platen Table Size (D-W) 50 Tons 13/16" thru 3/4" *5" thru 1/8" 10"X17" Coper-Notcher (Tons) (Mat.) 56 2-3/4" x 4" x 1/4" Dimensions (NET) W-L-H 24 "x66"x60" Plate Shear 15" Long 3/4" x 10" 5/8" x 15" Bending Attachment 8" Optional Lengths Available Weight (NET) lbs 2600 Strokes Per Minute 60 @ 1/2" Angle Shear (Max.) w/Special Blade 5" x 5" x 3/8" 4" x 4" x 1/2" To request information on this machine, contact us at info@piranhafab.com. Ironworkers Single P40 Single P50 Single P70 Single P90 Single P120 Dual PII-35 Dual PII-65 Dual PII-88 Dual PII-110 Dual PII-140 Options Tooling Ironworker Specs (pdf)