 Piranha
Press Brakes are available in White, Piranha Green
and other custom colors.
CNC GAUGING: All
Piranha press brakes are machined, predrilled, and
prewired for installation of Piranha optional CNC
controls. Piranha offers several versions of optional
CNC controls, including Automec and Hurco.
Gen II Plus
X Back Gauge:
- Fully integrated Gen II Plus X back gauge
is simple to program and easy to use
- Driven by high quality servo motor and control,
using ball screws and hardened linear races
- Rigid, machined aluminum extrusion back gauge
bar
- Easily adjustable R-Axis using two hand wheels
- Two flip-up style fingers with ledge for
easy gauging
- Retro-fit kits available for any Piranha
Generation II Press Brake
- 24" back gauge travel
- Gauge speed: 800 inches per minute
- Gauge holding force: 200 lbs.; impact force:
400 lbs.
- Powered by press brake electrical system
|
AUTOMEC
CNC 300:
- RS232 interface with software for off-line
programming
- 300 job storage
- Automatic ram referencing to tool height
(top of stroke)
- Tool library
- Angle or depth programming
- Back gauge retract on pinch points
- Programmable open height and slow approach
point
- Inch or mm measurements
- R-axis programmable gauge bar available.
|
 |
B or HD Series
Back Gauge:
- 400 pounds holding force
- Disc brakes
- Dual ball screws
|
|
| Other CNC models available
from Automec: CNC99 Control and CNC2000 Control |
HURCO
Hurco AB7 Control:
- Store 600 jobs or 2400 bends
- Fast set-up -- data carry forward minimizes
keystrokes, allows quick edit and correction
- Tool libraries standard with two-axis systems
- Flange angle or ram depth programming
- Automatically calculates bend allowance --
adjustable for each station
- "Simple job" mode for quick bends
- Industrial grade components
- Diagnostic capability in conversational English
format
- Permanent data storage
- RS232-C interface, standard
|
|
Hurco Back Gauges:
- Easy horizontal and vertical adjustment
- Gauge speed up to 800 ipm
- Closed-loop servo system
- R-Axis available
|
LP11 Model:
- Low profile design
- Heavy-duty U-shaped gauge bar
- Gauge travel 24"
- Gauge holding force 200 lbs.
|
S6 & S7 Models:
- Cross braced, one-piece cast aluminum
- Patented Y-shaped gauge bar
- Gauge travel up to 24"
- Gauge holding force 200 lbs.
|
 |
| Also available from
Hurco: AB6 CNC Control, Off-Line Programming Package. |
| 
